The microwave monostatic sensors Forteza FM-60 (24)-BT used for the protection of individual sections of the perimeter, where the use of two-position detectors is difficult or impossible, such as deadlocks, marshy areas, ravines, crossing guard, storage areas, tunnels, bridges, overpasses, etc.
- Alignment of the sensitivity along the entire length of the detection zone makes it possible to clearly define its borders, and to increase the noise immunity of the movement of people and vehicles outside the detection zone. This is the main and most important difference of Forteza FM-60 (24)-BT detectors from the other Doppler detectors.
- The division of the detection area of 12 sub-zones allows the sensitivity adjustment of each of them individually. In each sub-zone sets its signal gain and the threshold level that can be adapted for a specific detector noise conditions at the site.
- Each sub-zone can be adjusted using a PC via USB-interface (disconnection of sub-zones, separately sensitivity setting in each sub-zone, Antimasking and so on), remotely via RS-485 or with an Android-Device via Bluetooth.
- The detectors possible to deactivation one or more sub-zones. Disable them, you can organise "sanctioned" passages zone in the protected area for the free movement of people going through the checkpoint and the free passage of transport through the gate. To improve noise immunity is recommended to disable non-use subzones.